Bleno 3D – 3D model from drone photos for roof, facade and quote
Fly over the property, upload the photos, measure in the 3D model: Bleno generates a 3D model you can rotate from the photo series of your own drone, suggests roof areas, edges and facades – and takes the confirmed dimensions straight into the quote.
From drone flight to 3D model
You fly over the property with your own drone in a few minutes – a grid over the roof, plus a circle around the building. You upload the photo series in the project, in the office or directly on site from the employee app. Bleno checks the series in advance and generates a textured 3D model from it.
- Upload a photo series of usually 80 to 200 photos in the project
- Upload also from the employee app – with progress and resumable after an interruption
- Check before calculating: number of photos, GPS data, camera angles
- Clear notice if something is missing from the series – instead of a model full of holes
- Bleno uses surveyed ground control points (gcp_list.txt) and RTK series for the scale
- Notification as soon as the model is ready
Your own scan instead of a drone
Not every property needs a drone flight. With an iPhone Pro or iPad Pro, your employees scan facade sections, terraces, lawns or piles of earth in the Bleno app simply by walking along them. If you work with a laser scanner or your own photogrammetry, you upload your point cloud directly. You measure in it just as in the drone model.
- Scan outdoors in the Bleno app with the LiDAR sensor, range up to about 5 m
- Upload your own point cloud as .las, .laz or .e57 up to 2 GB
- No reference distance needed for a LiDAR scan – the scale is correct by itself
- Roof and facade recognition, terrain and volume tools as in the drone model
- Scans from the app do not count towards your 3D models per month
Measure in the model
In the project’s “3D model” tab you rotate and zoom the model and see the property from all sides – without an additional program. For a photo series without ground control points or RTK, you first set a reference distance that you measured on site, such as the eaves. This makes the scale correct, and you measure lengths, areas and heights.
- Rotate, zoom and pan the model in the browser
- Without ground control points, RTK or LiDAR, a reference distance is required before dimensions can go into the measurement sheet
- “Photos” tool: click on a spot to see the original photos in full resolution
- Tools for length, area and height, plus deductions for windows or dormers
- Pitch and true area result from the model – no manual input
Recognise roof areas and edges
Bleno suggests the roof areas – each with size, pitch and orientation – and names the edges: ridge, hip, valley, eaves and verge. You check each suggestion and accept, discard or correct it. Nothing ends up in the quote unchecked.
- Roof areas with area in m², pitch and orientation as a suggestion
- Edges coloured by type, with totals per type – for example for gutters, ridge tiles or valley flashing
- Dormers, chimneys and roof windows as deduction suggestions
- Accept, discard, merge or correct suggestions
- If recognition is uncertain, a clear notice instead of wrong areas
Facade and scaffolding area
The same recognition works on the walls: for each side of the facade, Bleno suggests the area, width and height up to the eaves and ridge, deducts windows and doors and derives the scaffolding area from it – as a basis for painting, rendering, insulation or scaffolding.
- Facade areas per side with windows and doors deducted
- Heights up to the eaves and up to the ridge
- Scaffolding area per side as a suggestion
- Number of openings per side – as an estimate, not as an order dimension
- Plinth length per side
Recognise building components, close gaps
Bleno searches the drone photos for windows, doors, solar panels, roof windows, chimneys as well as gutters and downpipes and shows each find in the 3D measurement as a separate suggestion – with type, photo evidence and a notice if photo and model contradict each other. You accept or discard each hit with one click. Bleno visibly fills in spots that are missing from the model, for example under solar panels or in the shadow of the roof overhang, as an addition.
- Windows, doors, solar panels, roof windows, chimneys, gutters and downpipes as suggestions from the photos
- For each hit, the source and the number of photos on which the component can be seen
- Accept, discard or undo – accepted windows and doors increase the number of openings on the facade
- Gaps in the model are filled in – clearly marked and can be hidden, both in the viewer and the customer portal
- Filled-in areas are never included in measurements or the measurement sheet
- Share of gaps per roof and facade area, with a notice when a repeat flight would make sense
Terrain and earth volumes
For landscaping and earthworks: from the terrain’s elevation model you measure areas, height differences and volumes – for example for paving, excavation or a pile of earth.
- Measure areas following the terrain, e.g. for paving or lawn
- Height profile along a line and height difference between two points
- Volume for excavation, fill and bulk material in m³
- Add values to the measurement sheet in m², m or m³
Take it straight into the quote
Confirmed dimensions become a normal measurement group on the quote line item – just like with manual digital measurement. You apply the quantity with one click, and the measurement sheet in the quote PDF shows where it comes from.
- Dimensions as a measurement group directly on the quote line item
- Measurement sheet in the PDF with the “3D measurement” row including reference distance and pitch
- No typing up of dimensions between programs
- Measuring, confirming suggestions and applying them is reserved for the office
- Download data: point cloud (LAZ), 3D model (GLB), orthophoto and terrain model (GeoTIFF) for CAD and GIS
Show the model in the customer portal
Share the 3D model with your customer. They rotate their roof in the customer portal on a phone or computer and understand at a glance what you are offering – and you visibly record the condition before work begins.
- Sharing per model, can be revoked at any time
- View only: internal measurements and notes stay in the office
- In the customer portal on phone and computer – without separate software
How to fly correctly
Good models come from good photos. If you wish, Bleno plans the flight itself: from the house dimensions and heights, it creates a route following the flight guide, as a waypoint file for DJI Fly and split up by battery. The principle is always the same:
- Grid over the roof with the camera pointing straight down
- One or two circles around the building with the camera tilted – slightly flatter for facades
- Plenty of overlap between the photos: better one photo too many than a gap
- Photos as JPEG with GPS data, without changing the camera during the flight
- An overcast sky is ideal: no harsh shadows, no reflections, little wind
Benefits
Bleno 3D: what it does for you
- Roof measurement without climbing onto the roof
- Areas, pitches and edges from one model instead of many individual measurements
- Dimensions directly on the quote line item – no typing up
- With your own drone or your own scan, whenever it suits you
- Recognition as a suggestion – you keep every figure under control
- Your customer sees their roof as a 3D model in the customer portal
- One tool for roof, facade and terrain
FAQ
Frequently asked questions
Bleno 3D is in development; individual parts such as measuring in the model have already been built. This page shows the planned range of functions. Before we launch, we check the models on real roofs against dimensions measured on site. We will announce the launch in the app under “What’s new” and in the newsletter. Until then, you measure roof areas with measurement from the drone photo – already included in Bleno today.
A standard drone with a camera that saves photos as JPEG with a GPS position and can point the camera straight down and at an angle. You do not need RTK or surveying equipment – but if you have an RTK drone, Bleno uses it. If you wish, Bleno plans the flight itself and generates the waypoints for DJI Fly so that the photos overlap evenly; this is being tested initially with the DJI Mini 5 Pro. Flying by hand also works but takes practice.
Bleno 3D is planned as a paid add-on to your Bleno plan: €49 per month plus VAT, including 5 3D models per month (unused ones expire at the end of the month). Each additional model costs €9 plus VAT; with annual payment you save 10% on the base fee. The add-on can be booked from the launch; prices may change until then.
That depends on the weight and class of your drone. Under the EU drone regulation, you generally have to register as an operator for a drone with a camera (in Germany with the Federal Aviation Office, Luftfahrt-Bundesamt); from 250 g or class C1, the EU A1/A3 proof of competency is added, and for heavier classes and flights closer to people further certificates. In Germany, liability insurance is also mandatory, and special rules apply over other people’s residential properties and in geo-zones – such as the owners’ consent. This is an overview, not legal advice (as of September 2026). The rules in force at the time are decisive – please check before every flight.
The 3D model is intended as a basis for quotes and material planning, not as a replacement for re-measurement on site. How well the dimensions fit depends above all on the photo series – overlap, light, vegetation – and on the reference distance: the GPS of an ordinary drone provides consistent proportions, but no reliable scale. That is why Bleno requires a distance measured on site before dimensions go into the measurement – unless the series has surveyed ground control points, comes from an RTK drone or is a LiDAR scan. Recognised areas and edges are suggestions that you check and correct if necessary. We will only state accuracy figures once our tests against dimensions measured on site are complete.
Well suited are gable, hipped, mono-pitch and pyramid roofs, simple dormers and straight facades. More difficult are nested roofs, heavy vegetation, existing solar systems and flat roofs with a parapet: there, Bleno suggests less or reports that no reliable recognition is possible – you can still measure by hand in the model. Interiors cannot be captured with drone photos, and you control the drone itself with your usual flight app, not from Bleno.
Employees upload photo series in the employee app and see the models of their projects. Only admins can measure, confirm recognised areas and edges and take dimensions into the quote – so the measurement stays in one hand.
Matching features
These features work hand in hand in your daily work. You'll find all the others in the overview.
Measurements
Record measurements with formulas per line item and take them straight into the quote.
Learn more – Measurements →Quotes & invoices
Create professional quotes, order confirmations and invoices in minutes.
Learn more – Quotes & invoices →Customer portal
A secure portal where customers see documents, complete tasks and sign reports.
Learn more – Customer portal →Employee app
Daily plan, time tracking, documents, materials and chat on your team's phones.
Learn more – Employee app →Ready to get started?
Try Bleno free for 14 days, with no obligation. No credit card required.